Applications
Material selection starts with the device function and process conditions. Use these application summaries to identify a starting material family, then confirm every requirement with the drawing, process flow, and inspection plan.
Silicon carbide (SiC)
Power electronics & EV systems
Substrates for power-device development, epitaxy, and high-voltage or high-temperature designs. Confirm polytype, conductivity, diameter, orientation, thickness, surface finish, and defect limits.
SiC, sapphire, and selected compound substrates
RF, communications & photonics
Material choice depends on frequency, thermal load, device stack, and process compatibility. Confirm substrate type, resistivity or conductivity, crystal orientation, and the intended epitaxial or device process.
Sapphire, ruby, and fused quartz
Optical windows, lasers & metrology
Transparent materials and precision components for optical paths, laser assemblies, inspection systems, and instrumentation. Specify wavelength, transmission needs, geometry, surface quality, flatness, parallelism, and coating requirements.
Fused quartz and sapphire components
Semiconductor process equipment
Tubes, plates, rods, windows, and machined parts can be reviewed for thermal process tools and equipment assemblies. Provide the process environment, temperature, dimensions, interfaces, cleanliness, and inspection requirements.
BF33 glass and sapphire
MEMS, sensors & microfluidics
Glass and sapphire substrates support device development where optical access, thermal behavior, mechanical strength, or bonding interfaces matter. Confirm grade, thickness, surface finish, flatness, edge profile, and any holes or coatings.
Diamond-copper composite and specialty substrates
Advanced packaging & thermal management
Thermal-management materials are specified around heat load, package geometry, interface design, and mechanical constraints. State dimensions, layer or composite architecture, target thermal conductivity, tolerance, test method, and required documentation.
Match a material to your process
Send the target application, geometry, process conditions, critical tolerances, quantity, and delivery timing. We will review the requirements and confirm what can be supplied.